The INNOX IHDW-1000 is the latest addition to the innox series of wireless transmitters. With the IHDW-1000, we increased the range to 1000 feet and designed the body of the transmitter and receiver to be compatible with Innox Quick Mount system. The IHDW-1000 features uncompressed, zero delay wireless video in a lightweight and affordable package. With a 1000 foot range, this system is perfect for various types of uses such as with wireless follow focus systems as well as gimbal and Steadicam operators. The IHDW-1000 is perfect anytime you need to be untethered from the camera and require reliable wireless video over long distances.
Zero Delay and 1000 Feet of Range
The IHDW-1000 supports zero delay video transmission so it is perfect for situations where timing is critical such as with wireless follow focus systems. It features a 1000 foot range to give you the freedom to move about without having to worry about losing signal.
Many wireless systems compress video, but this negatively affects the video quality and introduces delay. The IHDW-1000 sends uncompressed video and allows for zero delay because the system doesn’t spend time compressing and uncompressing the video. The IHDW-1000 supports up to 1080 60p uncompressed video.
Inputs and Outputs
Whether you are using HDMI or SDI, the IHDW-1000 has you covered. It supports both HDMI 1.3 and 3G-SDI so you get uncompressed high definition video up to 1080 60p. The IHDW-1000 systems are also capable of cross converting whatever signal you are feeding them, allowing you to switch from SDI to HDMI or HDMI to SDI.
Broadcast to 4 RX’s
Send your signal simultaneously into 4 receivers.
To keep the system light and the cost of use low, we include the necessary battery plates with the IHDW-1000. They come pre-installed and allow you to power the units easily and reliably. The transmitter uses the Sony L Series style batteries and the receiver relies on a V-Mount battery. The units also include 4-pin LEMO compatible power connectors so you can supply power externally with the included P-Tap cables. This allows you to use the same pro batteries that are powering your camera to power the IHDW-1000 as well.
Durable, Reliable and Easy to Use
The IHDW-1000 is made out of durable machined aluminum and is extremely easy to set up. You don’t have to mess with complicated menus or setups with its simple-to-use wireless channel selection switch. Just power on the units and they will sync in about 20 seconds or less. The transmitter is small and lightweight so it can be mounted just about anywhere like to your camera’s shoe mount. The receiver features five external antennas to ensure a strong signal as well as 4 signal strength LED indicators. This way you always have a clear indication of your signal strength.
The Complete Package
The IHDW-1000 ships inside of a durable hard case to make transporting it easy. Inside, you will find an articulating arm and clamp to help you mount the units. Two P-Tap to Lemo compatible cables are also included for more power options. With the IHDW-1000, you’ll get the complete package.